VizieR

CfA VizieR . ADAC VizieR . Cambridge (UK) VizieR . IUCAA VizieR . INASAN VizieR .

VizieR

  
J/A+A/661/A5
  The eFEDS AGN catalog (Liu+, 2022)
ReadMe+ftp
2022A&A...661A...5L
Similar Catalogs
Post annotation 		img(gal)
1.J/A+A/661/A5/table4Single-powerlaw results (27910 rows)

Simple ConstraintList Of Constraints
 
Query by Constraints constraints help applied on Columns (Output Order: + - )
ShowSortColumn  Constraint Explain   (UCD)
  recno  Record number assigned by the VizieR team. Should Not be used for identification. (meta.record)
  ID-SRC   [1/32683] ID of the sources in the eFEDS main X-ray catalog (Paper I) (ID_SRC) (meta.id;meta.main)
  z   [-0.01/8.0] The redshift adopted for the spectral model (Redshift) (src.redshift)
  GammaKL  power-law slope, KL divergence (in nats units) (Gamma_KL) (stat.fit.param)
  b_GammaH  power-law slope, HDI lower limit (Gamma_HLo) (arith.grad;stat.min)
  B_GammaH  power-law slope, HDI upper limit (Gamma_HUp) (arith.grad;stat.max)
  lognHKL  log AGN column density, KL divergence (in nats units) (lognH_KL) (stat.fit.param)
  b_lognHH [cm-2] log AGN column density, HDI lower limit (lognH_HLo) (phys.columnDensity;stat.min)
  B_lognHH [cm-2] log AGN column density, HDI upper limit (lognH_HUp) (phys.columnDensity;stat.max)
  logPowNKL  log power-law normalization, KL divergence (in nats units) (logPowNorm_KL) (stat.fit.param)
  b_logPowNH ph/keV/cm2/slog power-law normalization, HDI lower limit (logPowNorm_HLo) (arith.zp;arith.ratio)

ALL cols		    
 (i)indexed column
  B_logPowNH ph/keV/cm2/slog power-law normalization, HDI upper limit (logPowNorm_HUp) (arith.zp;arith.ratio)
  GammaBF  power-law slope, best-fit model (Gamma_BF) (spect.index)
  lognHBF [cm-2] log AGN column density, best-fit model (lognH_BF) (phys.columnDensity;meta.modelled)
  logPowNBF ph/keV/cm2/slog power-law normalization, best-fit model (logPowNorm_BF) (stat.fit.param)
  FluxObsBFS mW/m2 Observed flux in observed 0.5-2 keV, best-fit model (FluxObsvBFs) (phot.flux;em.X-ray)
  FluxObsMedS mW/m2 Observed flux in observed 0.5-2 keV, posterior median (FluxObsvMeds) (phot.flux;em.X-ray)
  b_FluxObsS mW/m2 Observed flux in observed 0.5-2 keV, 1sigma lower limit (FluxObsvLo1s) (phot.flux;em.X-ray.soft)
  B_FluxObsS mW/m2 Observed flux in observed 0.5-2 keV, 1sigma upper limit (FluxObsvUp1s) (phot.flux;em.X-ray.soft)
  b2_FluxObsS mW/m2 Observed flux in observed 0.5-2 keV, 2sigma lower limit (FluxObsvLo2s) (stat.error)
  B2_FluxObsS mW/m2 Observed flux in observed 0.5-2 keV, 2sigma upper limit (FluxObsvUp2s) (stat.error)
  FluxObsBFT mW/m2 Observed flux in observed 2.3-5 keV, best-fit model (FluxObsvBFt) (phot.flux;em.X-ray)
  FluxObsMedT mW/m2 Observed flux in observed 2.3-5 keV, posterior median (FluxObsvMedt) (phot.flux;em.X-ray)
  b_FluxObsT mW/m2 Observed flux in observed 2.3-5 keV, 1sigma lower limit (FluxObsvLo1t) (phot.flux;em.X-ray.medium)

ALL cols		    
 (i)indexed column
  B_FluxObsT mW/m2 Observed flux in observed 2.3-5 keV, 1sigma upper limit (FluxObsvUp1t) (phot.flux;em.X-ray.medium)
  b2_FluxObsT mW/m2 Observed flux in observed 2.3-5 keV, 2sigma lower limit (FluxObsvLo2t) (stat.error)
  B2_FluxObsT mW/m2 Observed flux in observed 2.3-5 keV, 2sigma upper limit (FluxObsvUp2t) (stat.error)
  FluxcBFS mW/m2 Absorption corrected flux in observed 0.5-2 keV, best-fit model (FluxCorrBFs) (phot.flux;em.X-ray)
  FluxcMedS mW/m2 Absorption corrected flux in observed 0.5-2 keV, posterior median (FluxCorrMeds) (phot.flux;em.X-ray)
  b_FluxcS mW/m2 Absorption corrected flux in observed 0.5-2 keV, 1sigma lower limit (FluxCorrLo1s) (phot.flux;em.X-ray.soft)
  B_FluxcS mW/m2 Absorption corrected flux in observed 0.5-2 keV, 1sigma upper limit (FluxCorrUp1s) (phot.flux;em.X-ray.soft)
  b2_FluxcS mW/m2 Absorption corrected flux in observed 0.5-2 keV, 2sigma lower limit (FluxCorrLo2s) (stat.error)
  B2_FluxcS mW/m2 Absorption corrected flux in observed 0.5-2 keV, 2sigma upper limit (FluxCorrUp2s) (stat.error)
  FluxcBFT mW/m2 Absorption corrected flux in observed 2.3-5 keV, best-fit model (FluxCorrBFt) (phot.flux;em.X-ray)
  FluxcMedT mW/m2 Absorption corrected flux in observed 2.3-5 keV, posterior median (FluxCorrMedt) (phot.flux;em.X-ray)
  b_FluxcT mW/m2 Absorption corrected flux in observed 2.3-5 keV, 1sigma lower limit (FluxCorrLo1t) (phot.flux;em.X-ray.medium)
  B_FluxcT mW/m2 Absorption corrected flux in observed 2.3-5 keV, 1sigma upper limit (FluxCorrUp1t) (phot.flux;em.X-ray.medium)

ALL cols		    
 (i)indexed column
  b2_FluxcT mW/m2 Absorption corrected flux in observed 2.3-5 keV, 2sigma lower limit (FluxCorrLo2t) (stat.error)
  B2_FluxcT mW/m2 Absorption corrected flux in observed 2.3-5 keV, 2sigma upper limit (FluxCorrUp2t) (stat.error)
  FluxIBFS mW/m2 Absorption corrected flux in rest-frame 0.5-2 keV, best-fit model (FluxIntrBFs) (phot.flux;em.X-ray)
  FluxIMedS mW/m2 Absorption corrected flux in rest-frame 0.5-2 keV, posterior median (FluxIntrMeds) (phot.flux;em.X-ray)
  b_FluxIS mW/m2 Absorption corrected flux in rest-frame 0.5-2keV, 1sigma lower limit (FluxIntrLo1s) (phot.flux;em.X-ray.soft)
  B_FluxIS mW/m2 Absorption corrected flux in rest-frame 0.5-2keV, 1sigma upper limit (FluxIntrUp1s) (phot.flux;em.X-ray.soft)
  b2_FluxIS mW/m2 Absorption corrected flux in rest-frame 0.5-2 keV, 2sigma lower limit (FluxIntrLo2s) (stat.error)
  B2_FluxIS mW/m2 Absorption corrected flux in rest-frame 0.5-2 keV, 2sigma upper limit (FluxIntrUp2s) (stat.error)
  FluxIBF2keV mW/m2/eV Absorption corrected flux at rest-frame 2keV, best- fit (FluxIntrBF2keV) (phot.flux;em.X-ray)
  FluxIMed2keV mW/m2/eV Absorption corrected flux at rest-frame 2keV, median (FluxIntrMed2keV) (phot.flux;em.X-ray)
  b_FluxI2keV mW/m2/eV Absorption corrected flux at rest-frame 2keV, 1sigma lower limit (FluxIntrLo12keV) (phot.flux)
  B_FluxI2keV mW/m2/eV Absorption corrected flux at rest-frame 2keV, 1sigma upper limit (FluxIntrUp12keV) (phot.flux)
  b2_FluxI2keV mW/m2/eV Absorption corrected flux at rest-frame 2keV, 2sigma lower limit (FluxIntrLo22keV) (stat.error)

ALL cols		    
 (i)indexed column
  B2_FluxI2keV mW/m2/eV Absorption corrected flux at rest-frame 2keV, 2sigma upper limit (FluxIntrUp22keV) (stat.error)
  LumIBFS 10-7W (n) Intrinsic luminosity in rest-frame 0.5-2 keV, best-fit model (LumiIntrBFs) (phys.luminosity;em.X-ray)
  LumIMedS 10-7W (n) Intrinsic luminosity in rest-frame 0.5-2 keV, posterior median (LumiIntrMeds) (phys.luminosity;em.X-ray)
  b_LumIS 10-7W (n) Intrinsic luminosity in rest-frame 0.5-2 keV, 1sigma lower limit (LumiIntrLo1s) (phys.luminosity;em.X-ray.soft)
  B_LumIS 10-7W (n) Intrinsic luminosity in rest-frame 0.5-2 keV, 1sigma upper limit (LumiIntrUp1s) (phys.luminosity;em.X-ray.soft)
  b2_LumIS 10-7W (n) Intrinsic luminosity in rest-frame 0.5-2 keV, 2sigma lower limit (LumiIntrLo2s) (stat.error)
  B2_LumIS 10-7W (n) Intrinsic luminosity in rest-frame 0.5-2 keV, 2sigma upper limit (LumiIntrUp2s) (stat.error)
  LumIBF2keV 10-7W/eV (n) Intrinsic luminosity at rest-frame 2keV, best-fit model (LumiIntrBF2keV) (phys.luminosity;em.X-ray)
  LumIMed2keV 10-7W/eV (n) Intrinsic luminosity at rest-frame 2keV, posterior median (LumiIntrMed2keV) (phys.luminosity;em.X-ray)
  b_LumI2keV 10-7W/eV (n) Intrinsic luminosity at rest-frame 2keV, 1sigma lower limit (LumiIntrLo12keV) (phys.luminosity)
  B_LumI2keV 10-7W/eV (n) Intrinsic luminosity at rest-frame 2keV, 1sigma upper limit (LumiIntrUp12keV) (phys.luminosity)
  b2_LumI2keV 10-7W/eV (n) Intrinsic luminosity at rest-frame 2keV, 2sigma lower limit (LumiIntrLo22keV) (stat.error)
  B2_LumI2keV 10-7W/eV (n) Intrinsic luminosity at rest-frame 2keV, 2sigma upper limit (LumiIntrUp22keV) (stat.error)

ALL cols		    
(n) indicates a possible blank or NULL column(i)indexed column
  GammaMed  power-law slope, posterior median (Gamma_Med) (spect.index)
  b_Gamma  power-law slope, percentile lower limit (Gamma_Lo) (arith.grad;stat.min)
  B_Gamma  power-law slope, percentile upper limit (Gamma_Up) (arith.grad;stat.max)
  GammaMean  power-law slope, mean (Gamma_Mean) (spect.index)
  s_Gamma  power-law slope, standard deviation (Gamma_Std) (stat.stdev)
  lognHMed [cm-2] log AGN column density, posterior median (lognH_Med) (phys.columnDensity;stat.median)
  b_lognH [cm-2] log AGN column density, percentile lower limit (lognH_Lo) (phys.columnDensity;stat.min)
  B_lognH [cm-2] log AGN column density, percentile upper limit (lognH_Up) (phys.columnDensity;stat.max)
  lognHMean [cm-2] log AGN column density, mean (lognH_Mean) (phys.columnDensity;stat.mean)
  s_lognH [cm-2] log AGN column density, standard deviation (lognH_Std) (stat.stdev;phys.columnDensity)
  logPowNMed ph/keV/cm2/slog power-law normalization, posterior median (logPowNorm_Med) (stat.fit.param)
  b_logPowN ph/keV/cm2/slog power-law normalization, percentile lower limit (logPowNorm_Lo) (arith.zp;arith.ratio)
  B_logPowN ph/keV/cm2/slog power-law normalization, percentile upper limit (logPowNorm_Up) (arith.zp;arith.ratio)

ALL cols		    
(n) indicates a possible blank or NULL column(i)indexed column
  logPowNMean ph/keV/cm2/slog power-law normalization, mean (logPowNorm_Mean) (stat.fit.param)
  s_logPowN ph/keV/cm2/slog power-law normalization, standard deviation (logPowNorm_Std) (arith.zp;arith.ratio)
  logBkgNMed  log background normalization, posterior median (logBkgNorm_Med) (instr.background)
  b_logBkgN  log background normalization, percentile lower limit (logBkgNorm_Lo) (instr.background;arith.ratio)
  B_logBkgN  log background normalization, percentile upper limit (logBkgNorm_Up) (instr.background;arith.ratio)
  logBkgNMean  log background normalization, mean (logBkgNorm_Mean) (instr.background)
  s_logBkgN  log background normalization, standard deviation (logBkgNorm_Std) (instr.background;arith.ratio)
  chi25  (n) Chi^2 of the best-fit model against the rebinned data (≥25 cts/bin) (chi25) (stat.fit.chi2)
  dof25  (n) DOF of the rebinned data, which has at least 25 counts per bin (dof25) (stat.fit.dof)
  logZ  log10 Bayesian evidence (logZ) (stat.fit.param)
  NHclass   [1/4] Class of AGN NH measurement with model 1 (single-powerlaw) (NHclass) (Note 1)   (src.class)
  PaperI  Display the Paper I (Brunner et al., Cat. J/A+A/661/A1) data (meta.ref.url)
  PaperII  Display the Paper II (Salvato et al., Cat. J/A+A/661/A3) data (meta.ref.url)

ALL cols		    
(n) indicates a possible blank or NULL column(i)indexed column
Adapt form
 Display your selection only Reset to default columns
usage  Display UCD1+    UCD1  
elapse time 1