VizieR

CfA VizieR . ADAC VizieR . Cambridge (UK) VizieR . IUCAA VizieR . INASAN VizieR .

VizieR

Simple TargetList Of TargetsFast Xmatch with large catalogs or Simbad
Target Name (resolved by Sesame) or Position:
 Target dimension:
NB: The epoch used for the query is the original epoch of the table(s)Radius Box size

  
J/MNRAS/413/1206
  XMM survey of 12um selected galaxies (Brightman+, 2011)
ReadMe+ftp
2011MNRAS.413.1206B
Similar Catalogs
Post annotation 		img(gal)
1.J/MNRAS/413/1206/Xsources(c)Observational data and parameters of the basic model (power law and thermal plasma) (tables 2 and 3 of paper) (Note) (126 rows)
2.J/MNRAS/413/1206/table4Parameters of the second power-law component, if it is present (44 rows)
3.J/MNRAS/413/1206/table5Parameters of the soft excess component, if it is present (15 rows)
4.J/MNRAS/413/1206/table6Parameters of the reflection component, if it is present (44 rows)
5.J/MNRAS/413/1206/table7X-ray spectral fitting data. Parameters of the warm absorber, if it is present (39 rows)
6.J/MNRAS/413/1206/table8Parameters of the Fe-Kα line, be it narrow or broad, if it is present (71 rows)
7.J/MNRAS/413/1206/table9Details of the Compton thick sources found in this sample (16 rows)

Simple ConstraintList Of Constraints
 
Query by Constraints constraints help applied on Columns (Output Order: + - )
ShowSortJoin tables
more join
Column  Constraint Explain   (UCD)
  (ALL)recno  Record number assigned by the VizieR team. Should Not be used for identification. (meta.record)
  (1)M (char) M indicates that more parameters are available for the X spectrum fitting (meta.ref.url)
   (ALL)Name (char) (i) Galaxy name as given by NED (meta.id;meta.main)
  (1)ONames (char) Galaxy name(s) as given by RMS (meta.id)
  (1)RAJ2000 deg (i) RMS right ascension in decimal degrees (J2000) (pos.eq.ra;meta.main)
  (1)DEJ2000 deg (i) RMS declination in decimal degrees (J2000) (pos.eq.dec;meta.main)
  (1)z  Redshift as reported in NED (src.redshift)
  (1)n_z (char) [a] negative z (Note 1)   (meta.note)
  (1)ObsID  XMM-Newton observation identifier (meta.id;obs.param;obs)
  (1)Rev  XMM-Newton revolution number (meta.number;time.period)
  (1)Date "Y:M:D" (n)Date of XMM-Newton observation (time.epoch)

ALL cols		    
(n) indicates a possible blank or NULL column(i)indexed column
  (1)Dur ks Duration of the XMM-Newton observation before background screening (time.interval)
  (1)Texp ks Exposure time after screening and dead-time correction (arith.factor;time.duration;obs.exposure)
  (1)Mode (char) XMM-Newton readout mode (Note 2)   (instr.setup)
  (1)Filt (char) Optical filter in place during XMM-Newton observation (spect.dopplerVeloc.opt;em.opt;obs)
  (1)chi2  chi2 value of the fit (stat.fit.chi2;stat.fit.param;meta.modelled)
  (1)dof  Degree of freedom value of the fit (stat.fit.dof)
  (1)n_dof (char) Note on dof (Note 1)   (meta.note)
  (1)NHg 10+20cm-2Galactic column density (phys.columnDensity;pos.galactic)
  (1)l_NH (char) Limit flag on NH (meta.code.error)
  (1)NH 10+22cm-2(n) Neutral column density measured in the primary power law (phys.columnDensity)
  (1)E_NH 10+22cm-2(n) Error on NH (upper value) (stat.error;stat.max)
  (1)e_NH 10+22cm-2(n) Error on NH (lower value) (stat.error)
  (1)n_NH (char) [*] * indicates that an ionized absorber has been detected in this spectral fit, details of which are in Table 7 (meta.note)

ALL cols		    
(n) indicates a possible blank or NULL column(i)indexed column
  (1)Gam1  Power-law index of the primary power law Γ1 (spect.index)
  (1)n_Gam1 (char) [f] f indicates that this parameter was fixed in the fit (meta.note)
  (1)E_Gam1  (n) Error on Gamma1 (upper value) (stat.error;stat.max)
  (1)e_Gam1  (n) Error on Gam1 (lower value) (stat.error)
  (1)Apl 10-5/cm2/s/keV(n) Normalization of the primary power law (x10-5ph/cm2/s/keV at 1keV) (stat.fit.param)
  (1)E_Apl 10-5/cm2/s/keV(n) Error on Apl (upper value) (stat.error;stat.max)
  (1)e_Apl 10-5/cm2/s/keV(n) Error on Apl (lower value) (stat.error)
  (1+3)kT keV (n) Temperature of the thermal plasma component (phys.temperature)
  (1+3)E_kT keV (n) Error on kT (upper value) (stat.error;stat.max)
  (1+3)e_kT keV (n) Error on kT (lower value) (stat.error;phys.energy)
  (1+3+7)R  (n) Ratio of the normalization of the thermal plasma component to the normalization of the primary power law (stat.fit.param)
  (1+7)E_R  (n) Error on R (upper value) (stat.error;stat.max)
  (1+7)e_R  (n) Error on R (upper value) (stat.error)

ALL cols		    
(n) indicates a possible blank or NULL column(i)indexed column
  (1)FHX 10-17W/m2Observed flux in the 2-10keV band (phot.flux;em.X-ray)
  (1)logLHX [10-7W] logarithm of the intrinsic luminosity in 2-10keV (hard) band (phys.luminosity;em.X-ray)
  (1)12um (char) 12µ sample (Rush et al. 1993, Cat. VII/157) (meta.ref.url)
  (1)Simbad (char) ask the Simbad data-base about this object
  (1)NED (char) ask the NED data-base about this object
  (2)NH.2 10+22cm02(n) Neutral column density measured in the secondary power law (phys.columnDensity)
  (2)E_NH.2 10+22cm02(n) Error on NH.2 (upper limit) (stat.error;stat.max)
  (2)e_NH.2 10+22cm02(n) Error on NH.2 (lower limit) (stat.error)
  (2+4)Gam2  (n) Power-law index of the secondary power law Γ2 (spect.index)
  (2+4)E_Gam2  (n) Error on Gam2 (upper limit) (stat.error;stat.max)
  (2+4)e_Gam2  (n) Error on Gam2 (lower limit) (stat.error)
  (2+4)n_Gam2 (char) [G] G when Gam2=Gam1 (meta.note)
  (2)Fpl  Ratio of the normalization of the second power law to the primary power law (stat.fit.param)

ALL cols		    
(n) indicates a possible blank or NULL column(i)indexed column
  (2)E_Fpl  (n) Error on Fpl (upper value) (stat.error;stat.max)
  (2)e_Fpl  (n) Error on Fpl (lower value) (stat.error)
  (3)n_R (char) [a] Note on R (Note 1)   (meta.note)
  (3)Model (char) Model used (bbody or compTT) (instr.setup;meta.modelled)
  (3)T0 keV (n) The input soft photon (Wien) temperature (compTT model only) (phys.temperature)
  (3)E_T0 keV (n) Error on T0 (upper value) (stat.error;stat.max)
  (3)e_T0 keV (n) Error on T0 (lower value) (stat.error)
  (3)taup  (n) Plasma optical depth (compTT model only) (phys.absorption.opticalDepth)
  (3)E_taup  (n) Error on taup (upper value) (stat.error;stat.max)
  (3)e_taup  (n) Error on taup (lower value) (stat.error)
  (3)FSX  Ratio of the normalization of this component to the normalization of the primary power law (stat.fit.param)
  (3)E_FSX  (n) Error on FSX (upper value) (stat.error;stat.max)
  (3)e_FSX  (n) Error on FSX (lower value) (stat.error)

ALL cols		    
(n) indicates a possible blank or NULL column(i)indexed column
  (4)f_Gam2 (char) [f] f when parameter has been fixed at this value (meta.code)
  (4)Rpex  Ratio of the normalization of the PEXMON component to the normalization of the primary power law (stat.fit.param)
  (4)E_Rpex  (n) Error on Rpex (upper value) (stat.error;stat.max)
  (4)e_Rpex  (n) Error on Rpex (lower value) (stat.error)
  (4)Rtor  (n) Ratio of the normalization of the TORUS component to the normalization of the primary power law (only when Rpex>1) (stat.fit.param)
  (4)logLHXpex [10-7W] (n) Intrinsic 2-10keV luminosity as determined from the PEXMON component (phys.luminosity;em.X-ray)
  (4)logLHXtor [10-7W] (n) Intrinsic 2-10keV luminosity as determined from the TORUS component (phys.luminosity;em.X-ray)
  (5)logNH [cm-2] logarithm of the ionized column density (phys.columnDensity)
  (5)E_logNH [cm-2] (n) Error on logNH (upper value) (stat.error;stat.max)
  (5)e_logNH [cm-2] (n) Error on logNH (lower value) (stat.error)
  (5)logxi [-] logarithm of the ionization parameter, ξ (phys)
  (5)E_logxi [-] (n) Error on logxi (upper value) (stat.error;stat.max)
  (5)e_logxi [-] (n) Error on logxi (lower value) (stat.error)

ALL cols		    
(n) indicates a possible blank or NULL column(i)indexed column
  (6)EW6.4 eV (n) Equivalent width of the narrow line at 6.4keV modelled by either TRANS or PEXMON (spect.line.eqWidth;em.X-ray.medium;meta.modelled)
  (6)E_EW6.4 eV (n) Error on EW6.4 (upper value) (stat.error;stat.max)
  (6)e_EW6.4 eV (n) Error on EW6.4 (lower value) (stat.error)
  (6)EFeKa keV (n) Energy of the line constrained to be between 6.2 and 6.6keV, not associated with any other component (phys.energy;spect.line)
  (6)E_EFeKa keV (n) Error on EFeKa (upper value) (stat.error;stat.max)
  (6)e_EFeKa keV (n) Error on EFeKa (lower value) (stat.error)
  (6)l_sigFeKa (char) Limit flag on sigmaFeKa (meta.code.error)
  (6)sigFeKa  (n) Gaussian width of this component (spect.line.width)
  (6)E_sigFeKa  (n) Error on sigFeKa (upper value) (stat.error;stat.max)
  (6)e_sigFeKa  (n) Error on sigFeKa (lower value) (stat.error)
  (6+7)EWFeKa eV (n) Equivalent width of FeKα (spect.line.eqWidth)
  (6+7)E_EWFeKa eV (n) Error on EWFeKa (upper value) (stat.error;stat.max)
  (6+7)e_EWFeKa eV (n) Error on EWFeKa (lower value) (stat.error)

ALL cols		    
(n) indicates a possible blank or NULL column(i)indexed column
  (7)NH cm-2 (n) Directly measured hydrogen column density (phys.columnDensity)
  (7)E_NH cm-2 (n) Error on NH (upper value) (stat.error;stat.max)
  (7)e_NH cm-2 (n) Error on NH (lower value) (stat.error)

ALL cols		    
(n) indicates a possible blank or NULL column(i)indexed column
Adapt form
 Display your selection only Reset to default columns
usage  Display UCD1+    UCD1  
elapse time 0