VizieR

CfA VizieR . ADAC VizieR . Cambridge (UK) VizieR . IUCAA VizieR . INASAN VizieR .

VizieR

  
J/A+A/661/A5
  The eFEDS AGN catalog (Liu+, 2022)
ReadMe+ftp
2022A&A...661A...5L
Similar Catalogs
Post annotation 		img(gal)
1.J/A+A/661/A5/table6Powerlaw+blackbody results (27910 rows)

Simple ConstraintList Of Constraints
 
Query by Constraints constraints help applied on Columns (Output Order: + - )
ShowSortColumn  Constraint Explain   (UCD)
  recno  Record number assigned by the VizieR team. Should Not be used for identification. (meta.record)
  ID-SRC   [1/32683] ID of the sources in the eFEDS main X-ray catalog (Paper I) (ID_SRC) (meta.id;meta.main)
  z   [-0.01/8.0] The redshift adopted for the spectral model (Redshift) (src.redshift)
  GammaKL  power-law slope, KL divergence (in nats units) (Gamma_KL) (stat.fit.param)
  b_GammaH  power-law slope, HDI lower limit (Gamma_HLo) (arith.grad;stat.min)
  B_GammaH  power-law slope, HDI upper limit (Gamma_HUp) (arith.grad;stat.max)
  lognHKL  log AGN column density, KL divergence (in nats units) (lognH_KL) (stat.fit.param)
  b_lognHH [cm-2] log AGN column density, HDI lower limit (lognH_HLo) (phys.columnDensity;stat.min)
  B_lognHH [cm-2] log AGN column density, HDI upper limit (lognH_HUp) (phys.columnDensity;stat.max)
  logPowNKL  log power-law normalization, KL divergence (in nats units) (logPowNorm_KL) (stat.fit.param)
  b_logPowNH [ph/keV/cm2/s]log power-law normalization, HDI lower limit (logPowNorm_HLo) (arith.zp;arith.ratio)

ALL cols		    
 (i)indexed column
  B_logPowNH [ph/keV/cm2/s]log power-law normalization, HDI upper limit (logPowNorm_HUp) (arith.zp;arith.ratio)
  logkTKL  log temperature, KL divergence (in nats units) (logkT_KL) (stat.fit.param)
  b_logkTH [keV] log temperature, HDI lower limit (logkT_HLo) (phys.temperature;stat.min)
  B_logkTH [keV] log temperature, HDI upper limit (logkT_HUp) (phys.temperature;stat.max)
  logBBNKL  log blackbody normalization, KL divergence (in nats units) (logBBNorm_KL) (stat.fit.param)
  b_logBBNH [10+24W/pc2]log blackbody normalization in 10+31erg/pc2, HDI lower limit (logBBNorm_HLo) (arith.zp;arith.ratio)
  B_logBBNH [10+24W/pc2]log blackbody normalization in 10+31erg/pc2, HDI upper limit (logBBNorm_HUp) (arith.zp;arith.ratio)
  GammaBF  power-law slope, best-fit model (Gamma_BF) (spect.index)
  lognHBF [cm-2] log AGN column density, best-fit model (lognH_BF) (phys.columnDensity)
  logPowNBF [ph/keV/cm2/s]log power- law normalization, best-fit model (logPowNorm_BF) (stat.fit.param)
  logkTBF [keV] log temperature, best- fit model (logkT_BF) (phys.temperature)
  logBBNBF [10+24W/pc2]log blackbody normalization in 10+31erg/pc2, best-fit model (logBBNorm_BF) (stat.fit.param)
  FluxObsBFS mW/m2 Observed flux in observed 0.5-2 keV, best-fit model (FluxObsvBFs) (phot.flux;em.X-ray)

ALL cols		    
 (i)indexed column
  FluxObsMedS mW/m2 Observed flux in observed 0.5-2 keV, posterior median (FluxObsvMeds) (phot.flux;em.X-ray)
  b_FluxObsS mW/m2 Observed flux in observed 0.5-2 keV, 1sigma lower limit (FluxObsvLo1s) (phot.flux;em.X-ray.soft)
  B_FluxObsS mW/m2 Observed flux in observed 0.5-2 keV, 1sigma upper limit (FluxObsvUp1s) (phot.flux;em.X-ray.soft)
  b2_FluxObsS mW/m2 Observed flux in observed 0.5-2 keV, 2sigma lower limit (FluxObsvLo2s) (stat.error)
  B2_FluxObsS mW/m2 Observed flux in observed 0.5-2 keV, 2sigma upper limit (FluxObsvUp2s) (stat.error)
  FluxObsBFT mW/m2 Observed flux in observed 2.3-5 keV, best-fit model (FluxObsvBFt) (phot.flux;em.X-ray)
  FluxObsMedT mW/m2 Observed flux in observed 2.3-5 keV, posterior median (FluxObsvMedt) (phot.flux;em.X-ray)
  b_FluxObsT mW/m2 Observed flux in observed 2.3-5 keV, 1sigma lower limit (FluxObsvLo1t) (phot.flux;em.X-ray.medium)
  B_FluxObsT mW/m2 Observed flux in observed 2.3-5 keV, 1sigma upper limit (FluxObsvUp1t) (phot.flux;em.X-ray.medium)
  b2_FluxObsT mW/m2 Observed flux in observed 2.3-5 keV, 2sigma lower limit (FluxObsvLo2t) (stat.error)
  B2_FluxObsT mW/m2 Observed flux in observed 2.3-5 keV, 2sigma upper limit (FluxObsvUp2t) (stat.error)
  FluxCBFS mW/m2 Absorption corrected flux in observed 0.5-2 keV, best-fit model (FluxCorrBFs) (phot.flux;em.X-ray)
  FluxCMedS mW/m2 Absorption corrected flux in observed 0.5-2 keV, posterior median (FluxCorrMeds) (phot.flux;em.X-ray)

ALL cols		    
 (i)indexed column
  b_FluxCS mW/m2 Absorption corrected flux in observed 0.5-2 keV, 1sigma lower limit (FluxCorrLo1s) (phot.flux;em.X-ray.soft)
  B_FluxCS mW/m2 Absorption corrected flux in observed 0.5-2 keV, 1sigma upper limit (FluxCorrUp1s) (phot.flux;em.X-ray.soft)
  b2_FluxCS mW/m2 Absorption corrected flux in observed 0.5-2 keV, 2sigma lower limit (FluxCorrLo2s) (stat.error)
  B2_FluxCS mW/m2 Absorption corrected flux in observed 0.5-2 keV, 2sigma upper limit (FluxCorrUp2s) (stat.error)
  FluxCBFT mW/m2 Absorption corrected flux in observed 2.3-5 keV, best-fit model (FluxCorrBFt) (phot.flux;em.X-ray)
  FluxCMedT mW/m2 Absorption corrected flux in observed 2.3-5 keV, posterior median (FluxCorrMedt) (phot.flux;em.X-ray)
  b_FluxCT mW/m2 Absorption corrected flux in observed 2.3-5 keV, 1sigma lower limit (FluxCorrLo1t) (phot.flux;em.X-ray.medium)
  B_FluxCT mW/m2 Absorption corrected flux in observed 2.3-5 keV, 1sigma upper limit (FluxCorrUp1t) (phot.flux;em.X-ray.medium)
  b2_FluxCT mW/m2 Absorption corrected flux in observed 2.3-5 keV, 2sigma lower limit (FluxCorrLo2t) (stat.error)
  B2_FluxCT mW/m2 Absorption corrected flux in observed 2.3-5 keV, 2sigma upper limit (FluxCorrUp2t) (stat.error)
  FluxIBFS mW/m2 Absorption corrected flux in rest-frame 0.5-2 keV, best-fit model (FluxIntrBFs) (phot.flux;em.X-ray)
  FluxIMedS mW/m2 Absorption corrected flux in rest-frame 0.5-2 keV, posterior median (FluxIntrMeds) (phot.flux;em.X-ray)
  b_FluxIS mW/m2 Absorption corrected flux in rest-frame 0.5-2keV, 1sigma lower limit (FluxIntrLo1s) (phot.flux;em.X-ray.soft)

ALL cols		    
 (i)indexed column
  B_FluxIS mW/m2 Absorption corrected flux in rest-frame 0.5-2keV, 1sigma upper limit (FluxIntrUp1s) (phot.flux;em.X-ray.soft)
  b2_FluxIS mW/m2 Absorption corrected flux in rest-frame 0.5-2 keV, 2sigma lower limit (FluxIntrLo2s) (stat.error)
  B2_FluxIS mW/m2 Absorption corrected flux in rest-frame 0.5-2 keV, 2sigma upper limit (FluxIntrUp2s) (stat.error)
  FluxIBF2keV mW/m2/eV Absorption corrected flux at rest-frame 2keV, best-fit (FluxIntrBF2keV) (phot.flux;em.X-ray)
  FluxIMed2keV mW/m2/eV Absorption corrected flux at rest-frame 2keV, median (FluxIntrMed2keV) (phot.flux;em.X-ray)
  b_FluxI2keV mW/m2/eV Absorption corrected flux at rest-frame 2keV, 1sigma lower limit (FluxIntrLo12keV) (phot.flux)
  B_FluxI2keV mW/m2/eV Absorption corrected flux at rest-frame 2keV, 1sigma upper limit (FluxIntrUp12keV) (phot.flux)
  b2_FluxI2keV mW/m2/eV Absorption corrected flux at rest-frame 2keV, 2sigma lower limit (FluxIntrLo22keV) (stat.error)
  B2_FluxI2keV mW/m2/eV Absorption corrected flux at rest-frame 2keV, 2sigma upper limit (FluxIntrUp22keV) (stat.error)
  LumIBFS 10-7W (n) Intrinsic luminosity in rest-frame 0.5-2 keV, best-fit model (LumiIntrBFs) (phys.luminosity;em.X-ray)
  LumIMedS 10-7W (n) Intrinsic luminosity in rest-frame 0.5-2 keV, posterior median (LumiIntrMeds) (phys.luminosity;em.X-ray)
  b_LumIS 10-7W (n) Intrinsic luminosity in rest-frame 0.5-2 keV, 1sigma lower limit (LumiIntrLo1s) (phys.luminosity;em.X-ray.soft)
  B_LumIS 10-7W (n) Intrinsic luminosity in rest-frame 0.5-2 keV, 1sigma upper limit (LumiIntrUp1s) (phys.luminosity;em.X-ray.soft)

ALL cols		    
(n) indicates a possible blank or NULL column(i)indexed column
  b2_LumIS 10-7W (n) Intrinsic luminosity in rest-frame 0.5-2 keV, 2sigma lower limit (LumiIntrLo2s) (stat.error)
  B2_LumIS 10-7W (n) Intrinsic luminosity in rest-frame 0.5-2 keV, 2sigma upper limit (LumiIntrUp2s) (stat.error)
  LumIBF2keV 10-7W/eV (n) Intrinsic luminosity at rest-frame 2keV, best-fit model (LumiIntrBF2keV) (phys.luminosity;em.X-ray)
  LumIMed2keV 10-7W/eV (n) Intrinsic luminosity at rest-frame 2keV, posterior median (LumiIntrMed2keV) (phys.luminosity;em.X-ray)
  b_LumI2keV 10-7W/eV (n) Intrinsic luminosity at rest-frame 2keV, 1sigma lower limit (LumiIntrLo12keV) (phys.luminosity)
  B_LumI2keV 10-7W/eV (n) Intrinsic luminosity at rest-frame 2keV, 1sigma upper limit (LumiIntrUp12keV) (phys.luminosity)
  b2_LumI2keV 10-7W/eV (n) Intrinsic luminosity at rest-frame 2keV, 2sigma lower limit (LumiIntrLo22keV) (stat.error)
  B2_LumI2keV 10-7W/eV (n) Intrinsic luminosity at rest-frame 2keV, 2sigma upper limit (LumiIntrUp22keV) (stat.error)
  GammaMed  power-law slope, posterior median (Gamma_Med) (spect.index)
  b_Gamma  power-law slope, percentile lower limit (Gamma_Lo) (arith.grad;stat.min)
  B_Gamma  power-law slope, percentile upper limit (Gamma_Up) (arith.grad;stat.max)
  GammaMean  power-law slope, mean (Gamma_Mean) (spect.index)
  s_Gamma  power-law slope, standard deviation (Gamma_Std) (stat.stdev)

ALL cols		    
(n) indicates a possible blank or NULL column(i)indexed column
  lognHMed [cm-2] log AGN column density, posterior median (lognH_Med) (phys.columnDensity)
  b_lognH [cm-2] log AGN column density, percentile lower limit (lognH_Lo) (phys.columnDensity;stat.min)
  B_lognH [cm-2] log AGN column density, percentile upper limit (lognH_Up) (phys.columnDensity;stat.max)
  lognHMean [cm-2] log AGN column density, mean (lognH_Mean) (phys.columnDensity)
  s_lognH [cm-2] log AGN column density, standard deviation (lognH_Std) (stat.stdev;phys.columnDensity)
  logPowNMed [ph/keV/cm2/s]log power-law normalization, posterior median (logPowNorm_Med) (stat.fit.param)
  b_logPowN [ph/keV/cm2/s]log power-law normalization, percentile lower limit (logPowNorm_Lo) (arith.zp;arith.ratio)
  B_logPowN [ph/keV/cm2/s]log power-law normalization, percentile upper limit (logPowNorm_Up) (arith.zp;arith.ratio)
  logPowNMean [ph/keV/cm2/s]log power-law normalization, mean (logPowNorm_Mean) (stat.fit.param)
  s_logPowN [ph/keV/cm2/s]log power-law normalization, standard deviation (logPowNorm_Std) (arith.zp;arith.ratio)
  logkTMed [keV] log temperature, posterior median (logkT_Med) (phys.temperature)
  b_logkT [keV] log temperature, percentile lower limit (logkT_Lo) (phys.temperature;stat.min)
  B_logkT [keV] log temperature, percentile upper limit (logkT_Up) (phys.temperature;stat.max)

ALL cols		    
(n) indicates a possible blank or NULL column(i)indexed column
  logkTMean [keV] log temperature, mean (logkT_Mean) (phys.temperature)
  s_logkT [keV] log temperature, standard deviation (logkT_Std) (stat.stdev;phys.temperature)
  logBBNMed [10+24W/pc2]log blackbody normalization in 10+31erg/s/pc2, posterior median (logBBNorm_Med) (stat.fit.param)
  b_logBBN [10+24W/pc2]log blackbody normalization in 10+31erg/s/pc2, percentile lower limit (logBBNorm_Lo) (arith.zp;arith.ratio)
  B_logBBN [10+24W/pc2]log blackbody normalization in 10+31erg/s/pc2, percentile upper limit (logBBNorm_Up) (arith.zp;arith.ratio)
  logBBNMean [10+24W/pc2]log blackbody normalization in 10+31erg/s/pc2, mean (logBBNorm_Mean) (stat.fit.param)
  s_logBBN [10+24W/pc2]log blackbody normalization in 10+31erg/s/pc2, standard deviation (logBBNorm_Std) (arith.zp;arith.ratio)
  logBkgNMed  log background normalization, posterior median (logBkgNorm_Med) (instr.background)
  b_logBkgN  log background normalization, percentile lower limit (logBkgNorm_Lo) (instr.background;arith.ratio)
  B_logBkgN  log background normalization, percentile upper limit (logBkgNorm_Up) (instr.background;arith.ratio)
  logBkgNMean  log background normalization, mean (logBkgNorm_Mean) (instr.background)
  s_logBkgN  log background normalization, standard deviation (logBkgNorm_Std) (instr.background;arith.ratio)
  chi25  (n) Chi^2 of the best-fit model against the rebinned data (≥25 cts/bin) (chi25) (stat.fit.chi2)
  dof25  (n) DOF of the rebinned data, which has at least 25 counts per bin (dof25) (stat.fit.dof)
  logZ  log10 Bayesian evidence (logZ) (stat.fit.param)
  logRbb  log blackbody relative strength at 1keV (logRbb) (stat.fit.param)
  PaperI  Display the Paper I (Brunner et al., Cat. J/A+A/661/A1) data (meta.ref.url)
  PaperII  Display the Paper II (Salvato et al., Cat. J/A+A/661/A3) data (meta.ref.url)

ALL cols		    
(n) indicates a possible blank or NULL column(i)indexed column
Adapt form
 Display your selection only Reset to default columns
usage  Display UCD1+    UCD1  

The following problems were encountered in this VizieR run:
**** 
**** -- no connection
**** Report from: stdb_pg,     Status: STDB_ERR 
****Postgres connect error
**** 
**** -- no connection
**** Report from: stdb_pg_conn,     Status: STDB_ERR 
****Couldn't connect with server
**** 
**** -- no connection
**** Report from: stdb_conn_dbms,     Status: STDB_ERR 
****No server is available for connection
**** 
**** -- no connection
**** Report from: stdb_pg,     Status: STDB_ERR 
****Postgres connect error
**** 
**** -- no connection
**** Report from: stdb_pg_conn,     Status: STDB_ERR 
****Couldn't connect with server
**** 
**** -- no connection
**** Report from: stdb_conn_dbms,     Status: STDB_ERR 
****No server is available for connection
If you can't find a solution, report to CDS and insert into your message the following details:

.errorfile=/tmp/VR12008.err (2024-04-23T13:43:51)
-3
-source=J/A+A/661/A5/table6
-ref=VIZ6627bb172ee8
elapse time 0