Summary of FITS file J/A+A/564/A38/fits/SCI_SLIT_MERGE1D_VIS_idl_1.fits:
--- fits/SCI_SLIT_MERGE1D_VIS_idl_1.fits ⇩Download⇩ file
ext xtension bpx (dim) x2880 extname
000 main -32 (24457) 52b FLUX [LINEAR=545.84/1034.96(0.02)]
001 IMAGE -32 (24457) 36b ERRS [0/24456(1)]
002 IMAGE -32 (24457) 36b QUAL [0/24456(1)]
The header of the FITS file is listed below,
followed by a sample of values (limited to 1000 lines).
|
#--- fits/SCI_SLIT_MERGE1D_VIS_idl_1.fits
#ext xtension bpx (dim) x2880 extname
#-------------------------------------------------------------------------------
#000 main -32 (24457) 52b FLUX [LINEAR=545.84/1034.96(0.02)]
#-------------------------------------------------------------------------------
SIMPLE = T / Standard FITS format: NOST 100-2.0
BITPIX = -32 / No. of bits per pixel
NAXIS = 1 / No. of axes in image
NAXIS1 = 24457 / No. of pixels
EXTEND = T / FITS extension may be present
COMMENT NOST 100-2.0: Hanisch,R. et al. 2001, Astron. & Astrophys. 376, 559
.
CRPIX1 = 1. / Reference pixel
CRVAL1 = 545.84 / Coordinate at reference pixel
CDELT1 = 0.02 / Coord. incr. per pixel (original value)
CTYPE1 = 'LINEAR ' / Units of coordinate
BUNIT = 'ADU ' / Units of data values
DATAMAX = 841.30267334 / Maximum data value
DATAMIN = 1.17549435082E-38 / Minimum data value
.
ORIGIN = 'ESO-MIDAS' / Written by MIDAS
DATE = '2012-07-06T10:00:09' / [UTC] Date of writing
FILENAME= 'SCI_SLIT_MERGE1D_VIS_idl_1.fits' / Original file base-name
MIDASFTP= 'IMAGE ' / MIDAS File Type
.
OBJECT = 'GRB ' / MIDAS desc.: IDENT(1)
RA = 246.863774 / MIDAS desc.: O_POS(1)
DEC = -29.41538 / MIDAS desc.: O_POS(2)
EQUINOX = 2000. / MIDAS desc.: O_POS(3)
DATE-OBS= '2012-03-27' / MIDAS desc.: O_TIME(1)
MJD-OBS = 56013.21112718 / MIDAS desc.: O_TIME(4)
TM-START= 18241.3882667 / MIDAS desc.: O_TIME(5)
EXPTIME = 600. / MIDAS desc.: O_TIME(7)
COMMENT FITS (Flexible Image Transport System) format is defined in 'Astronomy
COMMENT and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H
COMMENT FITS (Flexible Image Transport System) format is defined in 'Astron
COMMENT and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..35
COMMENT ITS (Flexible Image Transport System) format is defined in 'Astro
COMMENT nd Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..3
COMMENT TS (Flexible Image Transport System) format is defined in 'Astr
COMMENT d Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..
COMMENT S (Flexible Image Transport System) format is defined in 'Ast
COMMENT Astrophysics', volume 376, page 359; bibcode: 2001A&A...376.
COMMENT (Flexible Image Transport System) format is defined in 'As
COMMENT strophysics', volume 376, page 359; bibcode: 2001A&A...376
COMMENT Flexible Image Transport System) format is defined in 'A
COMMENT trophysics', volume 376, page 359; bibcode: 2001A&A...37
COMMENT lexible Image Transport System) format is defined in '
COMMENT rophysics', volume 376, page 359; bibcode: 2001A&A...3
COMMENT exible Image Transport System) format is defined in
COMMENT ophysics', volume 376, page 359; bibcode: 2001A&A...
COMMENT xible Image Transport System) format is defined i
COMMENT physics', volume 376, page 359; bibcode: 2001A&A..
COMMENT ible Image Transport System) format is defined
COMMENT hysics', volume 376, page 359; bibcode: 2001A&A.
COMMENT ble Image Transport System) format is define
COMMENT ysics', volume 376, page 359; bibcode: 2001A&A
COMMENT le Image Transport System) format is defin
COMMENT sics', volume 376, page 359; bibcode: 2001A&
COMMENT e Image Transport System) format is defi
COMMENT ics', volume 376, page 359; bibcode: 2001A
TELESCOP= 'ESO-VLT-U2' / MIDAS desc.: TELESCOP(1)
INSTRUME= 'XSHOOTER' / MIDAS desc.: INSTRUME(1)
RADECSYS= 'FK5 ' / MIDAS desc.: RADECSYS(1)
OBSERVER= 'UNKNOWN ' / MIDAS desc.: OBSERVER(1)
CD1_1 = 0.02
CD1_2 = 0.
CD2_1 = 0.
CD2_2 = 0.15
UTC = 18237. / 05:03:57.000 UTC at start
LST = 45748.454 / 12:42:28.454 LST at start
PI-COI = 'UNKNOWN ' / PI-COI name.
INHERIT = T / denotes the INHERIT keyword convention
CHECKSUM= 'lCk5o9h4lAh4l9h4' / HDU checksum updated 2012-03-27T05:15:22
DATASUM = '1774445572' / data unit checksum updated 2012-03-27T05:15:22
HDUCLASS= 'ESO ' / hdu classification
HDUDOC = 'DICD ' / hdu reference document
HDUVERS = 'DICD V6.0' / hdu reference document version
HDUCLAS1= 'IMAGE ' / hdu format classification
HDUCLAS2= 'DATA ' / hdu type classification
ERRDATA = 'ERRS ' / name of errs extension
QUALDATA= 'QUAL ' / name of qual extension
DATAMD5 = 'f56962923f77a7048c15b581123fc40a' / MD5 checksum
PIPEFILE= 'SCI_SLIT_MERGE2D_VIS.fits' / Filename of data product
EXTNAME = 'FLUX '
HIERARCH ESO OBS DID = 'ESO-VLT-DIC.OBS-1.11' / OBS Dictionary
HIERARCH ESO OBS EXECTIME = 3324 / Expected execution time
HIERARCH ESO OBS GRP = '0 ' / linked blocks
HIERARCH ESO OBS ID = 579576 / Observation block ID
HIERARCH ESO OBS NAME = 'ToO_GRBtrigger_4x600' / OB name
HIERARCH ESO OBS OBSERVER = 'UNKNOWN ' / Observer Name
HIERARCH ESO OBS PI-COI ID = 5501 / ESO internal PI-COI ID
HIERARCH ESO OBS PI-COI NAME = 'UNKNOWN ' / PI-COI name
HIERARCH ESO OBS PROG ID = '088.A-0051(C)' / ESO program identification
HIERARCH ESO OBS START = '2012-03-27T04:57:20' / OB start time
HIERARCH ESO OBS TARG NAME = 'GRB ' / OB target name
HIERARCH ESO OBS TPLNO = 2 / Template number within OB
HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL
HIERARCH ESO TPL EXPNO = 3 / Exposure number within template
HIERARCH ESO TPL ID = 'XSHOOTER_slt_obs_AutoNodOnSlit' / Template signa
HIERARCH ESO TPL NAME = 'XSHOOTER observations with AutoNodOnSlit offset'
HIERARCH ESO TPL NEXP = 13 / Number of exposures within templat
HIERARCH ESO TPL PRESEQ= 'XSHOOTER_obs_AutoNodOnSlit.seq' / Sequencer scri
HIERARCH ESO TPL START = '2012-03-27T05:03:11' / TPL start time
HIERARCH ESO TPL VERSION = '$Revision: 213208 $' / Version of the template
HIERARCH ESO TEL AIRM END = 1.488 / Airmass at end
HIERARCH ESO TEL AIRM START = 1.554 / Airmass at start
HIERARCH ESO TEL ALT = 39.983 / Alt angle at start
HIERARCH ESO TEL AMBI FWHM END = 0.66 / Observatory Seeing queried from AS
HIERARCH ESO TEL AMBI FWHM START = 0.59 / Observatory Seeing queried
HIERARCH ESO TEL AMBI PRES END = 744.4 / Observatory ambient air pressure q
HIERARCH ESO TEL AMBI PRES START = 744.38 / Observatory ambient air pr
HIERARCH ESO TEL AMBI RHUM = 43. / Observatory ambient relative humid
HIERARCH ESO TEL AMBI TAU0 = 0.0031 / Average coherence time
HIERARCH ESO TEL AMBI TEMP = 12.12 / Observatory ambient temperature qu
HIERARCH ESO TEL AMBI WINDDIR = 33.5 / Observatory ambient wind direction
HIERARCH ESO TEL AMBI WINDSP = 3.75 / Observatory ambient wind speed que
HIERARCH ESO TEL AZ = 288.743 / Az angle at start S=0,W=90
HIERARCH ESO TEL CHOP ST = F / True when chopping is active
HIERARCH ESO TEL DATE = '2000-01-01T00:00:00' / TCS installation date
HIERARCH ESO TEL DID = 'ESO-VLT-DIC.TCS' / Data dictionary for TEL
HIERARCH ESO TEL DOME STATUS = 'FULLY-OPEN' / Dome status
HIERARCH ESO TEL FOCU ID = 'CA ' / Telescope focus station ID
HIERARCH ESO TEL FOCU LEN = 108.557 / Focal length
HIERARCH ESO TEL FOCU SCALE = 1.894 / Focal scale
HIERARCH ESO TEL FOCU VALUE = 0.677 / M2 setting
HIERARCH ESO TEL GEOELEV = 2648. / Elevation above sea level (m)
HIERARCH ESO TEL GEOLAT= -24.6272 / Tel geo latitute (+=North)
HIERARCH ESO TEL GEOLON= -70.4048 / Tel geo longitude (+=East)
HIERARCH ESO TEL IA FWHM = 0.65 / Delivered seeing corrected by airm
HIERARCH ESO TEL IA FWHMLIN = 0.73 / Delivered seeing on IA detector (l
HIERARCH ESO TEL IA FWHMLINOBS = 0.92 / Delivered seeing on IA detector (l
HIERARCH ESO TEL ID = 'v 4.4 ' / TCS version number
HIERARCH ESO TEL MOON DEC = 20.49483 / 20:29:41.3 DEC (J2000)
HIERARCH ESO TEL MOON RA = 54.110904 / 03:36:26.6 RA (J2000)
HIERARCH ESO TEL OPER = 'I, Condor' / Telescope Operator
HIERARCH ESO TEL PARANG END = -97.721 / Parallactic angle at end
HIERARCH ESO TEL PARANG START = -98.691 / Parallactic angle at start
HIERARCH ESO TEL TARG ALPHA = 162727.47 / Alpha coordinate for the target
HIERARCH ESO TEL TARG COORDTYPE= 'M ' / Coordinate type (M=mean A=apparen
HIERARCH ESO TEL TARG DELTA = -292453.8 / Delta coordinate for the target
HIERARCH ESO TEL TARG EPOCH = 2000. / Epoch
HIERARCH ESO TEL TARG EPOCHSYSTEM = 'J ' / Epoch system (default J=Ju
HIERARCH ESO TEL TARG EQUINOX = 2000. / Equinox
HIERARCH ESO TEL TARG PARALLAX = 0. / Parallax
HIERARCH ESO TEL TARG PMA = 0. / Proper Motion Alpha
HIERARCH ESO TEL TARG PMD = 0. / Proper motion Delta
HIERARCH ESO TEL TARG RADVEL = 0. / Radial velocity
HIERARCH ESO TEL TH M1 TEMP = 11.72 / M1 superficial temperature
HIERARCH ESO TEL TRAK STATUS = 'NORMAL ' / Tracking status
HIERARCH ESO INS ADC1 DEC = -292630.17015 / Telescope desclination [deg].
HIERARCH ESO INS ADC1 END = 141.897 / Position angle at end [deg].
HIERARCH ESO INS ADC1 MODE = 'AUTO ' / ADC mode.
HIERARCH ESO INS ADC1 RA = 162815.340583 / Telescope right ascension [deg]
HIERARCH ESO INS ADC2 DEC = -292630.17015 / Telescope desclination [deg].
HIERARCH ESO INS ADC2 END = 222.93 / Position angle at end [deg].
HIERARCH ESO INS ADC2 MODE = 'AUTO ' / ADC mode.
HIERARCH ESO INS ADC2 RA = 162815.340583 / Telescope right ascension [deg]
HIERARCH ESO INS ADC3 DEC = -292630.17015 / Telescope desclination [deg].
HIERARCH ESO INS ADC3 ENCSTART = 27671 / ADC encoder value at exposure star
HIERARCH ESO INS ADC3 END = 140.476 / Position angle at end [deg].
HIERARCH ESO INS ADC3 MODE = 'AUTO ' / ADC mode.
HIERARCH ESO INS ADC3 RA = 162815.340583 / Telescope right ascension [deg]
HIERARCH ESO INS ADC4 DEC = -292630.17015 / Telescope desclination [deg].
HIERARCH ESO INS ADC4 ENCSTART = 43575 / ADC encoder value at exposure star
HIERARCH ESO INS ADC4 END = 212.923 / Position angle at end [deg].
HIERARCH ESO INS ADC4 MODE = 'AUTO ' / ADC mode.
HIERARCH ESO INS ADC4 RA = 162815.340583 / Telescope right ascension [deg]
HIERARCH ESO INS DATE = '2005-04-01' / Instrument release date (yyyy-mm-d
HIERARCH ESO INS DID = 'ESO-VLT-DIC.XSHOOTER_ICS-0.78' / Data dictionary
HIERARCH ESO INS FILT1 ID = 'PS6 ' / Filter unique id.
HIERARCH ESO INS FILT1 NAME = 'R ' / Filter name.
HIERARCH ESO INS FILT1 NO = 6 / Filter wheel position index.
HIERARCH ESO INS FOCU1 ENC = 26884 / Absolute position [Enc].
HIERARCH ESO INS FOCU1 POS = 13.7 / Position [C].
HIERARCH ESO INS FOCU2 ENC = 11750 / Absolute position [Enc].
HIERARCH ESO INS FOCU2 POS = 0. / Position [C].
HIERARCH ESO INS ID = 'XSHOOTER/1.60' / Instrument ID.
HIERARCH ESO INS MIRR1 ID = 'Tel ' / Mirror unique ID.
HIERARCH ESO INS MIRR1 NAME = 'Tel ' / Mirror name.
HIERARCH ESO INS MIRR1 NO = 1 / Mirror slide position.
HIERARCH ESO INS MODE = 'SLITSPEC' / Instrument mode used.
HIERARCH ESO INS OPTI2 ID = 'SLOT ' / OPTIi unique ID.
HIERARCH ESO INS OPTI2 NAME = 'SLOT ' / OPTIi name.
HIERARCH ESO INS OPTI2 NO = 3 / OPTIi slot number.
HIERARCH ESO INS OPTI2 TYPE = 'MIRROR ' / OPTIi element.
HIERARCH ESO INS OPTI3 ID = 'PS7 ' / OPTIi unique ID.
HIERARCH ESO INS OPTI3 NAME = '1.0x11 ' / OPTIi name.
HIERARCH ESO INS OPTI3 NO = 7 / OPTIi slot number.
HIERARCH ESO INS OPTI3 TYPE = 'SLIT ' / OPTIi element.
HIERARCH ESO INS OPTI4 ID = 'PS7 ' / OPTIi unique ID.
HIERARCH ESO INS OPTI4 NAME = '0.9x11 ' / OPTIi name.
HIERARCH ESO INS OPTI4 NO = 7 / OPTIi slot number.
HIERARCH ESO INS OPTI4 TYPE = 'SLIT ' / OPTIi element.
HIERARCH ESO INS OPTI5 ID = 'PS3 ' / OPTIi unique ID.
HIERARCH ESO INS OPTI5 NAME = '0.9x11 ' / OPTIi name.
HIERARCH ESO INS OPTI5 NO = 3 / OPTIi slot number.
HIERARCH ESO INS OPTI5 TYPE = 'SLIT ' / OPTIi element.
HIERARCH ESO INS PATH = 'SLITSPEC' / Optical path used.
HIERARCH ESO INS SENS21 ID = 'CA1F1 ' / sensor ID.
HIERARCH ESO INS SENS21 NAME = 'Cab.1 Flow rate' / sensor common name.
HIERARCH ESO INS SENS21 VAL = 52. / Cab. 1 Flow rate [l/h]
HIERARCH ESO INS SENS60 ID = 'NPM ' / sensor ID.
HIERARCH ESO INS SENS60 NAME = 'NIR cryo. P' / sensor common name.
HIERARCH ESO INS SENS60 VAL = 999999. / NIR Pressure [mbar]
HIERARCH ESO INS SENS81 ID = 'RANGE ' / sensor ID.
HIERARCH ESO INS SENS81 NAME = 'Heater Range' / sensor common name.
HIERARCH ESO INS SENS81 VAL = 4. / Lake 340 Heater Range
HIERARCH ESO INS SENS82 ID = 'HEATR ' / sensor ID.
HIERARCH ESO INS SENS82 NAME = 'Heater output' / sensor common name.
HIERARCH ESO INS SENS82 VAL = 48.5 / Lake 340 Heater output
HIERARCH ESO INS SHUT1 ID = 'INSH ' / Shutter ID.
HIERARCH ESO INS SHUT1 NAME = 'Instrument shutter' / Shutter name.
HIERARCH ESO INS SHUT1 ST = T / Shutter open.
HIERARCH ESO INS SWSIM = 'NORMAL ' / Software simulation.
HIERARCH ESO INS TEMP1 ID = 'TMUC ' / Temperature sensor ID.
HIERARCH ESO INS TEMP1 NAME = 'UVB Camera temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP1 VAL = 13.66 / UVB Camera temp. [C]
HIERARCH ESO INS TEMP10 ID = 'TMA ' / Temperature sensor ID.
HIERARCH ESO INS TEMP10 NAME = 'Ambient temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP10 VAL = 13.19 / Ambient temp. [C]
HIERARCH ESO INS TEMP11 ID = 'TMADC ' / Temperature sensor ID.
HIERARCH ESO INS TEMP11 NAME = 'BB UVB ADC temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP11 VAL = 15.5 / BB UVB ADC temp. [C]
HIERARCH ESO INS TEMP2 ID = 'TMUP ' / Temperature sensor ID.
HIERARCH ESO INS TEMP2 NAME = 'UVB Prism temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP2 VAL = 13.53 / UVB Prism temp. [C]
HIERARCH ESO INS TEMP21 ID = 'CA1OT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP21 NAME = 'Cab.1 outlet temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP21 VAL = 12.3 / Cab. 1 outlet temp. [C]
HIERARCH ESO INS TEMP22 ID = 'CA1IT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP22 NAME = 'Cab.1 inlet temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP22 VAL = 8.59 / Cab. 1 inlet temp. [C]
HIERARCH ESO INS TEMP23 ID = 'CA1CT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP23 NAME = 'Cab.1 temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP23 VAL = 17.48 / Cab. 1 temp. [C]
HIERARCH ESO INS TEMP24 ID = 'CA1AT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP24 NAME = 'Cab.1 Amb. temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP24 VAL = 13.8 / Cab. 1 Amb. temp. [C]
HIERARCH ESO INS TEMP3 ID = 'TMUB ' / Temperature sensor ID.
HIERARCH ESO INS TEMP3 NAME = 'UVB bench temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP3 VAL = 13.74 / UVB bench temp. [C]
HIERARCH ESO INS TEMP4 ID = 'TMVC ' / Temperature sensor ID.
HIERARCH ESO INS TEMP4 NAME = 'VIS Camera temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP4 VAL = 12.42 / VIS Camera temp. [C]
HIERARCH ESO INS TEMP5 ID = 'TMVP ' / Temperature sensor ID.
HIERARCH ESO INS TEMP5 NAME = 'VIS Prism temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP5 VAL = 13.02 / VIS Prism temp. [C]
HIERARCH ESO INS TEMP6 ID = 'TMVB ' / Temperature sensor ID.
HIERARCH ESO INS TEMP6 NAME = 'VIS bench temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP6 VAL = 13.06 / VIS bench temp. [C]
HIERARCH ESO INS TEMP7 ID = 'TMUCR ' / Temperature sensor ID.
HIERARCH ESO INS TEMP7 NAME = 'UVB cryo. temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP7 VAL = 8.74 / UVB cryo. temp. [C]
HIERARCH ESO INS TEMP8 ID = 'TMVCR ' / Temperature sensor ID.
HIERARCH ESO INS TEMP8 NAME = 'VIS cryo. temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP8 VAL = 11.3 / VIS cryo. temp. [C]
HIERARCH ESO INS TEMP80 ID = 'OBCT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP80 NAME = 'OB Cover Tel.' / Temperature sensor name.
HIERARCH ESO INS TEMP80 VAL = 103.97 / OB Cover Telescope [K]
HIERARCH ESO INS TEMP81 ID = 'OBCB ' / Temperature sensor ID.
HIERARCH ESO INS TEMP81 NAME = 'OB Cover Tank' / Temperature sensor name.
HIERARCH ESO INS TEMP81 VAL = 104. / OB Cover Tank [K]
HIERARCH ESO INS TEMP82 ID = 'OBPR ' / Temperature sensor ID.
HIERARCH ESO INS TEMP82 NAME = 'OB Prism1' / Temperature sensor name.
HIERARCH ESO INS TEMP82 VAL = 103.26 / OB Prism1 [K]
HIERARCH ESO INS TEMP83 ID = 'OBCL ' / Temperature sensor ID.
HIERARCH ESO INS TEMP83 NAME = 'OB Corrector Lens' / Temperature sensor name.
HIERARCH ESO INS TEMP83 VAL = 104.15 / OB Corrector Lens [K]
HIERARCH ESO INS TEMP84 ID = 'CP ' / Temperature sensor ID.
HIERARCH ESO INS TEMP84 NAME = 'Cryo. Cold Plate' / Temperature sensor name.
HIERARCH ESO INS TEMP84 VAL = 78.108 / Cryostat Cold Plate [K]
HIERARCH ESO INS TEMP85 ID = 'RS ' / Temperature sensor ID.
HIERARCH ESO INS TEMP85 NAME = 'Cryo. rad. shield' / Temperature sensor name.
HIERARCH ESO INS TEMP85 VAL = 97.472 / Cryostat rad. shield [K]
HIERARCH ESO INS TEMP86 ID = 'DCB ' / Temperature sensor ID.
HIERARCH ESO INS TEMP86 NAME = 'CCD Copper bar' / Temperature sensor name.
HIERARCH ESO INS TEMP86 VAL = 76.631 / CCD Copper bar [K]
HIERARCH ESO INS TEMP9 ID = 'TMNCR ' / Temperature sensor ID.
HIERARCH ESO INS TEMP9 NAME = 'NIR cryo. temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP9 VAL = 13.49 / NIR cryo. temp. [C]
HIERARCH ESO INS TEMP90 ID = 'NHT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP90 NAME = 'NIR Head temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP90 VAL = 79. / NIR Head temp. [K]
HIERARCH ESO INS TILT1 AFCX = 0.27 / Flexure corr. in X [volt].
HIERARCH ESO INS TILT1 AFCY = -0.43 / Flexure corr. in Y [volt].
HIERARCH ESO INS TILT1 CONVX = 0.208 / VoltToMarcsec conversion in X.
HIERARCH ESO INS TILT1 CONVY = 0.269 / VoltToMarcsec conversion in Y.
HIERARCH ESO INS TILT1 ENGX = 5.318 / Piezo voltage at end in X [volt].
HIERARCH ESO INS TILT1 ENGY = 2.895 / Piezo voltage at end in Y [volt].
HIERARCH ESO INS TILT1 ID = 'afcs1 ' / AFCS ID.
HIERARCH ESO INS TILT1 MODE = 'AUTO ' / AFCS mode.
HIERARCH ESO INS TILT1 NAME = 'Flexure comp. UVB' / AFCS description.
HIERARCH ESO INS TILT1 OFFSETX = 5. / Offset voltage in X [volt].
HIERARCH ESO INS TILT1 OFFSETY = 5. / Offset voltage in Y [volt].
HIERARCH ESO INS TILT1 POSXEND = 0.317 / Piezo position at end [volt].
HIERARCH ESO INS TILT1 POSXSTART = 0.281 / Piezo position at start in
HIERARCH ESO INS TILT1 POSYEND = -2.106 / Piezo position at end [volt].
HIERARCH ESO INS TILT1 POSYSTART = -2.238 / Piezo position at start in
HIERARCH ESO INS TILT1 REFRACXEND = 1.029 / Atm. refr. corr. end in X
HIERARCH ESO INS TILT1 REFRACXST = 0.884 / Atm. refr. corr. start in
HIERARCH ESO INS TILT1 REFRACYEND = -1.725 / Atm. refr. corr. end in Y
HIERARCH ESO INS TILT1 REFRACYST = -1.743 / Atm. refr. corr. start in
HIERARCH ESO INS TILT2 AFCX = -0.472 / Flexure corr. in X [volt].
HIERARCH ESO INS TILT2 AFCY = 0.331 / Flexure corr. in Y [volt].
HIERARCH ESO INS TILT2 CONVX = 0.291 / VoltToMarcsec conversion in X.
HIERARCH ESO INS TILT2 CONVY = 0.384 / VoltToMarcsec conversion in Y.
HIERARCH ESO INS TILT2 ENGX = 4.492 / Piezo voltage at end in X [volt].
HIERARCH ESO INS TILT2 ENGY = 6.8 / Piezo voltage at end in Y [volt].
HIERARCH ESO INS TILT2 ID = 'afcs2 ' / AFCS ID.
HIERARCH ESO INS TILT2 MODE = 'AUTO ' / AFCS mode.
HIERARCH ESO INS TILT2 NAME = 'Flexure comp. VIS' / AFCS description.
HIERARCH ESO INS TILT2 OFFSETX = 5. / Offset voltage in X [volt].
HIERARCH ESO INS TILT2 OFFSETY = 5. / Offset voltage in Y [volt].
HIERARCH ESO INS TILT2 POSXEND = -0.51 / Piezo position at end [volt].
HIERARCH ESO INS TILT2 POSXSTART = -0.481 / Piezo position at start in
HIERARCH ESO INS TILT2 POSYEND = 1.8 / Piezo position at end [volt].
HIERARCH ESO INS TILT2 POSYSTART = 1.916 / Piezo position at start in
HIERARCH ESO INS TILT2 REFRACXEND = -1.068 / Atm. refr. corr. end in X
HIERARCH ESO INS TILT2 REFRACXST = -0.902 / Atm. refr. corr. start in
HIERARCH ESO INS TILT2 REFRACYEND = 1.766 / Atm. refr. corr. end in Y
HIERARCH ESO INS TILT2 REFRACYST = 1.777 / Atm. refr. corr. start in
HIERARCH ESO INS TILT3 AFCX = -0.031 / Flexure corr. in X [volt].
HIERARCH ESO INS TILT3 AFCY = 0.208 / Flexure corr. in Y [volt].
HIERARCH ESO INS TILT3 CONVX = 0.58 / VoltToMarcsec conversion in X.
HIERARCH ESO INS TILT3 CONVY = 0.56 / VoltToMarcsec conversion in Y.
HIERARCH ESO INS TILT3 ENGX = 6.814 / Piezo voltage at end in X [volt].
HIERARCH ESO INS TILT3 ENGY = 5.261 / Piezo voltage at end in Y [volt].
HIERARCH ESO INS TILT3 ID = 'afcs3 ' / AFCS ID.
HIERARCH ESO INS TILT3 MODE = 'AUTO ' / AFCS mode.
HIERARCH ESO INS TILT3 NAME = 'Flexure comp. NIR' / AFCS description.
HIERARCH ESO INS TILT3 OFFSETX = 5. / Offset voltage in X [volt].
HIERARCH ESO INS TILT3 OFFSETY = 5. / Offset voltage in Y [volt].
HIERARCH ESO INS TILT3 POSXEND = 1.81 / Piezo position at end [volt].
HIERARCH ESO INS TILT3 POSXSTART = 1.956 / Piezo position at start in
HIERARCH ESO INS TILT3 POSYEND = 0.249 / Piezo position at end [volt].
HIERARCH ESO INS TILT3 POSYSTART = 0.218 / Piezo position at start in
HIERARCH ESO INS TILT3 REFRACXEND = -1.184 / Atm. refr. corr. end in X
HIERARCH ESO INS TILT3 REFRACXST = -0.961 / Atm. refr. corr. start in
HIERARCH ESO INS TILT3 REFRACYEND = 1.885 / Atm. refr. corr. end in Y
HIERARCH ESO INS TILT3 REFRACYST = 1.895 / Atm. refr. corr. start in
HIERARCH ESO DET BITS = 16 / Bits per pixel readout
HIERARCH ESO DET CHIP1 DATE = '2005-04-22' / Date of installation [YYYY-MM-DD
HIERARCH ESO DET CHIP1 ID = 'Catherine' / Detector chip identification
HIERARCH ESO DET CHIP1 INDEX = 1 / Chip index
HIERARCH ESO DET CHIP1 NAME = 'MIT/LL CCID-20' / Detector chip name
HIERARCH ESO DET CHIP1 NX = 2048 / # of pixels along X
HIERARCH ESO DET CHIP1 NY = 4102 / # of pixels along Y
HIERARCH ESO DET CHIP1 PSZX = 15. / Size of pixel in X
HIERARCH ESO DET CHIP1 PSZY = 15. / Size of pixel in Y
HIERARCH ESO DET CHIP1 X = 1 / X location in array
HIERARCH ESO DET CHIP1 XGAP = 0. / Gap between chips along x
HIERARCH ESO DET CHIP1 Y = 1 / Y location in array
HIERARCH ESO DET CHIP1 YGAP = 0. / Gap between chips along y
HIERARCH ESO DET CHIPS = 1 / # of chips in detector array
HIERARCH ESO DET DATE = '2005-22-04' / Installation date
HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start
HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction
HIERARCH ESO DET EXP NO= 771 / Unique exposure ID number
HIERARCH ESO DET EXP RDTTIME = 4.045 / image readout time
HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type
HIERARCH ESO DET EXP XFERTIM = 76.382 / image transfer time
HIERARCH ESO DET FRAM ID = 1 / Image sequencial number
HIERARCH ESO DET FRAM TYPE = 'Normal ' / Type of frame
HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id
HIERARCH ESO DET NAME = 'shdetv - shdetv' / Name of detector system
HIERARCH ESO DET OUT1 CHIP = 1 / Chip to which the output belongs
HIERARCH ESO DET OUT1 CONAD = 0.6 / Conversion from ADUs to electrons
HIERARCH ESO DET OUT1 GAIN = 1.67 / Conversion from electrons to ADU
HIERARCH ESO DET OUT1 ID = 'A ' / Output ID as from manufacturer
HIERARCH ESO DET OUT1 INDEX = 1 / Output index
HIERARCH ESO DET OUT1 NAME = 'A ' / Description of output
HIERARCH ESO DET OUT1 NX = 2048 / valid pixels along X
HIERARCH ESO DET OUT1 NY = 2000 / valid pixels along Y
HIERARCH ESO DET OUT1 OVSCX = 48 / Overscan region in X
HIERARCH ESO DET OUT1 OVSCY = 0 / Overscan region in Y
HIERARCH ESO DET OUT1 PRSCX = 10 / Prescan region in X
HIERARCH ESO DET OUT1 PRSCY = 0 / Prescan region in Y
HIERARCH ESO DET OUT1 RON = 3.2 / Readout noise per output (e-)
HIERARCH ESO DET OUT1 X= 1 / X location of output
HIERARCH ESO DET OUT1 Y= 1 / Y location of output
HIERARCH ESO DET OUTPUTS = 1 / # of outputs
HIERARCH ESO DET OUTREF= 0 / reference output
HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start
HIERARCH ESO DET READ CLOCK = '100k/1pt/hg/1x2' / Readout clock pattern used
HIERARCH ESO DET READ MODE = 'normal ' / Readout method
HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin
HIERARCH ESO DET READ SPEED = '1pt/100k/hg' / Readout speed
HIERARCH ESO DET SHUT ID = 'VA 25mm BistableCCD Sensor1' / Shutter unique
HIERARCH ESO DET SHUT TMCLOS = 0. / Time taken to close shutter
HIERARCH ESO DET SHUT TMOPEN = 0. / Time taken to open shutter
HIERARCH ESO DET SHUT TYPE = 'Iris on Slit' / type of shutter
HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode
HIERARCH ESO DET TELE INT = 600. / Interval between two successive te
HIERARCH ESO DET TELE NO = 4 / # of sources active
HIERARCH ESO DET TLM1 END = 135. / Telemetry value at read completion
HIERARCH ESO DET TLM1 ID = 'CCD Sensor1' / ID of telemetry sensor
HIERARCH ESO DET TLM1 NAME = 'CCD T1 ' / Description of telemetry param.
HIERARCH ESO DET TLM1 START = 135. / Telemetry value at read start
HIERARCH ESO DET TLM2 END = 142.9 / Telemetry value at read completion
HIERARCH ESO DET TLM2 ID = 'CCD Sensor2' / ID of telemetry sensor
HIERARCH ESO DET TLM2 NAME = 'CCD T2 ' / Description of telemetry param.
HIERARCH ESO DET TLM2 START = 143. / Telemetry value at read start
HIERARCH ESO DET TLM3 END = 0. / Telemetry value at read completion
HIERARCH ESO DET TLM3 ID = 'Box Temp' / ID of telemetry sensor
HIERARCH ESO DET TLM3 NAME = 'EBOX T ' / Description of telemetry param.
HIERARCH ESO DET TLM3 START = 0. / Telemetry value at read start
HIERARCH ESO DET TLM4 END = 0. / Telemetry value at read completion
HIERARCH ESO DET TLM4 ID = 'Vacuum ' / ID of telemetry sensor
HIERARCH ESO DET TLM4 NAME = 'Vacuum ' / Description of telemetry param.
HIERARCH ESO DET TLM4 START = 0. / Telemetry value at read start
HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X
HIERARCH ESO DET WIN1 BINY = 2 / Binning factor along Y
HIERARCH ESO DET WIN1 DIT1 = 600.000005 / actual subintegration time
HIERARCH ESO DET WIN1 DKTM = 600.3688 / Dark current time
HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations
HIERARCH ESO DET WIN1 NX = 2106 / # of pixels along X
HIERARCH ESO DET WIN1 NY = 2000 / # of pixels along Y
HIERARCH ESO DET WIN1 ST = T / If T, window enabled
HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X
HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y
HIERARCH ESO DET WIN1 UIT1 = 600. / user defined subintegration time
HIERARCH ESO DET WINDOWS = 1 / # of windows readout
HIERARCH ESO PRO CATG = 'SCI_SLIT_MERGE2D_VIS' / Category of pipeline product f
HIERARCH ESO PRO DATANCOM = 1
HIERARCH ESO PRO B RELOFF RA = 4.938312
HIERARCH ESO PRO B RELOFF DEC = 0.782994
HIERARCH ESO PRO B CUMOFF RA = 2.469156
HIERARCH ESO PRO B CUMOFF DEC = 0.391497
HIERARCH ESO PRO RECT BIN LAMBDA = 0.02
HIERARCH ESO PRO RECT BIN SPACE= 0.15
HIERARCH ESO PRO RECT LAMBDA MIN = 545.84
HIERARCH ESO PRO RECT LAMBDA MAX = 1034.96
HIERARCH ESO PRO RECT SPACE MIN= -10.25
HIERARCH ESO PRO RECT SPACE MAX= 5.5
HIERARCH ESO PRO EXTRACT SLIT MIN = 33.
HIERARCH ESO PRO EXTRACT SLIT MAX = 73.
HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO
HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type
HIERARCH ESO PRO TECH = 'ECHELLE,SLIT,NODDING' / Observation technique
HIERARCH ESO PRO SCIENCE = T / Scientific product if T
HIERARCH ESO PRO REC1 ID = 'xsh_scired_slit_nod' / Pipeline recipe (unique
HIERARCH ESO PRO REC1 DRS ID = 'cpl-6.0a1' / Data Reduction System identifier
HIERARCH ESO PRO REC1 PIPE ID = 'xsh/1.4.5' / Pipeline (unique) identifier
HIERARCH ESO PRO REC1 RAW1 NAME= 'XSHOOTER_SLT_OBJ_VIS_087_0041.fits' / File na
HIERARCH ESO PRO REC1 RAW1 CATG= 'OBJECT_SLIT_NOD_VIS' / Category of raw frame
HIERARCH ESO PRO REC1 RAW2 NAME= 'XSHOOTER_SLT_OBJ_VIS_087_0042.fits' / File na
HIERARCH ESO PRO REC1 RAW2 CATG= 'OBJECT_SLIT_NOD_VIS' / Category of raw frame
HIERARCH ESO PRO REC1 RAW3 NAME= 'XSHOOTER_SLT_OBJ_VIS_087_0043.fits' / File na
HIERARCH ESO PRO REC1 RAW3 CATG= 'OBJECT_SLIT_NOD_VIS' / Category of raw frame
HIERARCH ESO PRO REC1 RAW4 NAME= 'XSHOOTER_SLT_OBJ_VIS_087_0044.fits' / File na
HIERARCH ESO PRO REC1 RAW4 CATG= 'OBJECT_SLIT_NOD_VIS' / Category of raw frame
HIERARCH ESO PRO REC1 CAL1 NAME= 'MASTER_BIAS_VIS_1x2_100k.fits' / File name of
HIERARCH ESO PRO REC1 CAL1 CATG= 'MASTER_BIAS_VIS' / Category of calibration fr
HIERARCH ESO PRO REC1 CAL1 DATAMD5 = '34d9a452766b025bb4ce088adc3a090f' / MD
HIERARCH ESO PRO REC1 CAL2 NAME= 'xsh_mflat_ORDER_TAB_EDGES_SLIT_VIS.fits' / Fi
HIERARCH ESO PRO REC1 CAL2 CATG= 'ORDER_TAB_EDGES_SLIT_VIS' / Category of calib
HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '76c5f9513e59650656a8beacad07bcd2' / MD
HIERARCH ESO PRO REC1 CAL3 NAME= 'xsh_mflat_MASTER_FLAT_SLIT_VIS.fits' / File n
HIERARCH ESO PRO REC1 CAL3 CATG= 'MASTER_FLAT_SLIT_VIS' / Category of calibrati
HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '7d2dbdab60d5df6cc67ffbe2e2ddaaee' / MD
HIERARCH ESO PRO REC1 CAL4 NAME= 'xsh_2dmap_DISP_TAB_VIS.fits' / File name of c
HIERARCH ESO PRO REC1 CAL4 CATG= 'DISP_TAB_VIS' / Category of calibration frame
HIERARCH ESO PRO REC1 CAL4 DATAMD5 = 'a238e5c7a30749bea690d09c40acb637' / MD
HIERARCH ESO PRO REC1 CAL5 NAME= 'xsh_2dmap_WAVE_TAB_2D_VIS.fits' / File name o
HIERARCH ESO PRO REC1 CAL5 CATG= 'WAVE_TAB_2D_VIS' / Category of calibration fr
HIERARCH ESO PRO REC1 CAL5 DATAMD5 = '52398b6a8e5f1e8528a3b3c746139d4b' / MD
HIERARCH ESO PRO REC1 CAL6 NAME= 'merge_extVISspec_form_tab_corr.fits' / File n
HIERARCH ESO PRO REC1 CAL6 CATG= 'SPECTRAL_FORMAT_TAB_VIS' / Category of calibr
HIERARCH ESO PRO REC1 PARAM1 NAME = 'keep-temp' / If 'no', temporary files
HIERARCH ESO PRO REC1 PARAM1 VALUE = 'yes ' / Default: 'no'
HIERARCH ESO PRO REC1 PARAM2 NAME = 'debug-level' / Additional xshooter deb
HIERARCH ESO PRO REC1 PARAM2 VALUE = 'medium ' / Default: 'none'
HIERARCH ESO PRO REC1 PARAM3 NAME = 'time-stamp' / Add timestamp to product
HIERARCH ESO PRO REC1 PARAM3 VALUE = 'false ' / Default: false
HIERARCH ESO PRO REC1 PARAM4 NAME = 'decode-bp' / Integer representation of
HIERARCH ESO PRO REC1 PARAM4 VALUE = '2147483647' / Default: 2147483647
HIERARCH ESO PRO REC1 PARAM5 NAME = 'pre-overscan-corr' / pre-overscan corr
HIERARCH ESO PRO REC1 PARAM5 VALUE = '0 ' / Default: 0
HIERARCH ESO PRO REC1 PARAM6 NAME = 'stack-method' / Method used to build m
HIERARCH ESO PRO REC1 PARAM6 VALUE = 'median ' / Default: 'median'
HIERARCH ESO PRO REC1 PARAM7 NAME = 'klow ' / Kappa used to clip low lev
HIERARCH ESO PRO REC1 PARAM7 VALUE = '5 ' / Default: 5
HIERARCH ESO PRO REC1 PARAM8 NAME = 'khigh ' / Kappa used to clip high le
HIERARCH ESO PRO REC1 PARAM8 VALUE = '5 ' / Default: 5
HIERARCH ESO PRO REC1 PARAM9 NAME = 'niter ' / Number of kappa sigma iter
HIERARCH ESO PRO REC1 PARAM9 VALUE = '5 ' / Default: 5
HIERARCH ESO PRO REC1 PARAM10 NAME = 'background-nb-y' / number of points of
HIERARCH ESO PRO REC1 PARAM10 VALUE = '100 ' / Default: 100
HIERARCH ESO PRO REC1 PARAM11 NAME = 'background-radius-x' / half size of th
HIERARCH ESO PRO REC1 PARAM11 VALUE = '-1 ' / Default: -1
HIERARCH ESO PRO REC1 PARAM12 NAME = 'background-radius-y' / half size of th
HIERARCH ESO PRO REC1 PARAM12 VALUE = '2 ' / Default: 2
HIERARCH ESO PRO REC1 PARAM13 NAME = 'background-min-grid-frac' / Minimum fr
HIERARCH ESO PRO REC1 PARAM13 VALUE = '0.3333 ' / Default: 0.3333
HIERARCH ESO PRO REC1 PARAM14 NAME = 'background-grid-frac' / maximum fracti
HIERARCH ESO PRO REC1 PARAM14 VALUE = '0.5 ' / Default: 0.5
HIERARCH ESO PRO REC1 PARAM15 NAME = 'background-method' / method adopted fo
HIERARCH ESO PRO REC1 PARAM15 VALUE = 'poly ' / Default: 'poly'
HIERARCH ESO PRO REC1 PARAM16 NAME = 'background-smooth-x' / Smoothing radiu
HIERARCH ESO PRO REC1 PARAM16 VALUE = '-1 ' / Default: -1
HIERARCH ESO PRO REC1 PARAM17 NAME = 'background-smooth-y' / Smoothing radiu
HIERARCH ESO PRO REC1 PARAM17 VALUE = '100 ' / Default: 100
HIERARCH ESO PRO REC1 PARAM18 NAME = 'background-poly-deg-y' / Poly mode fit
HIERARCH ESO PRO REC1 PARAM18 VALUE = '2 ' / Default: 2
HIERARCH ESO PRO REC1 PARAM19 NAME = 'background-poly-deg-x' / Poly mode fit
HIERARCH ESO PRO REC1 PARAM19 VALUE = '2 ' / Default: 2
HIERARCH ESO PRO REC1 PARAM20 NAME = 'background-poly-kappa' / Poly mode kap
HIERARCH ESO PRO REC1 PARAM20 VALUE = '4 ' / Default: 4
HIERARCH ESO PRO REC1 PARAM21 NAME = 'removecrhsingle-frac-max' / Max fracti
HIERARCH ESO PRO REC1 PARAM21 VALUE = '0.1 ' / Default: 0.1
HIERARCH ESO PRO REC1 PARAM22 NAME = 'removecrhsingle-sigmalim' / Poisson fl
HIERARCH ESO PRO REC1 PARAM22 VALUE = '5 ' / Default: 5
HIERARCH ESO PRO REC1 PARAM23 NAME = 'removecrhsingle-flim' / Minimum contra
HIERARCH ESO PRO REC1 PARAM23 VALUE = '2 ' / Default: 2
HIERARCH ESO PRO REC1 PARAM24 NAME = 'removecrhsingle-niter' / Max number of
HIERARCH ESO PRO REC1 PARAM24 VALUE = '4 ' / Default: 4
HIERARCH ESO PRO REC1 PARAM25 NAME = 'rectify-kernel' / Name of the Interpol
HIERARCH ESO PRO REC1 PARAM25 VALUE = 'default ' / Default: 'default'
HIERARCH ESO PRO REC1 PARAM26 NAME = 'rectify-radius' / Rectify Interpolatio
HIERARCH ESO PRO REC1 PARAM26 VALUE = '4 ' / Default: 4
HIERARCH ESO PRO REC1 PARAM27 NAME = 'rectify-bin-lambda' / Wavelength step
HIERARCH ESO PRO REC1 PARAM27 VALUE = '0.02 ' / Default: -1
HIERARCH ESO PRO REC1 PARAM28 NAME = 'rectify-bin-slit' / Spatial step along
HIERARCH ESO PRO REC1 PARAM28 VALUE = '0.15 ' / Default: -1
HIERARCH ESO PRO REC1 PARAM29 NAME = 'rectify-conserve-flux' / Use flux cons
HIERARCH ESO PRO REC1 PARAM29 VALUE = 'false ' / Default: false
HIERARCH ESO PRO REC1 PARAM30 NAME = 'rectify-fast' / Fast if TRUE (Rect[B-A
HIERARCH ESO PRO REC1 PARAM30 VALUE = 'true ' / Default: true
HIERARCH ESO PRO REC1 PARAM31 NAME = 'localize-method' / Localization method
HIERARCH ESO PRO REC1 PARAM31 VALUE = 'MANUAL ' / Default: 'GAUSSIAN'
HIERARCH ESO PRO REC1 PARAM32 NAME = 'localize-chunk-nb' / Number of chunks
HIERARCH ESO PRO REC1 PARAM32 VALUE = '10 ' / Default: 10
HIERARCH ESO PRO REC1 PARAM33 NAME = 'localize-thresh' / Threshold relative
HIERARCH ESO PRO REC1 PARAM33 VALUE = '0.1 ' / Default: 0.1
HIERARCH ESO PRO REC1 PARAM34 NAME = 'localize-deg-lambda' / Degree in lambd
HIERARCH ESO PRO REC1 PARAM34 VALUE = '0 ' / Default: 0
HIERARCH ESO PRO REC1 PARAM35 NAME = 'localize-slit-position' / Object posit
HIERARCH ESO PRO REC1 PARAM35 VALUE = '-2.5 ' / Default: 0
HIERARCH ESO PRO REC1 PARAM36 NAME = 'localize-slit-hheight' / Object half h
HIERARCH ESO PRO REC1 PARAM36 VALUE = '1 ' / Default: 0.5
HIERARCH ESO PRO REC1 PARAM37 NAME = 'localize-kappa' / Kappa value for sigm
HIERARCH ESO PRO REC1 PARAM37 VALUE = '3 ' / Default: 3
HIERARCH ESO PRO REC1 PARAM38 NAME = 'localize-niter' / Number of iterations
HIERARCH ESO PRO REC1 PARAM38 VALUE = '3 ' / Default: 3
HIERARCH ESO PRO REC1 PARAM39 NAME = 'localize-use-skymask' / TRUE if we wan
HIERARCH ESO PRO REC1 PARAM39 VALUE = 'false ' / Default: false
HIERARCH ESO PRO REC1 PARAM40 NAME = 'localize-nod-throw' / Step (arcsec) be
HIERARCH ESO PRO REC1 PARAM40 VALUE = '0 ' / Default: 0
HIERARCH ESO PRO REC1 PARAM41 NAME = 'extract-method' / Method used for extr
HIERARCH ESO PRO REC1 PARAM41 VALUE = 'LOCALIZATION' / Default: 'NOD'
HIERARCH ESO PRO REC1 PARAM42 NAME = 'mergeord-method' / Method for combinin
HIERARCH ESO PRO REC1 PARAM42 VALUE = '0 ' / Default: 0
HIERARCH ESO PRO REC1 PARAM43 NAME = 'combinenod-min' / minimum NS size of r
HIERARCH ESO PRO REC1 PARAM43 VALUE = '5 ' / Default: 5
HIERARCH ESO PRO REC1 PARAM44 NAME = 'combinenod-clip' / TRUE if do sigma cl
HIERARCH ESO PRO REC1 PARAM44 VALUE = 'true ' / Default: true
HIERARCH ESO PRO REC1 PARAM45 NAME = 'combinenod-clip-sigma' / Kappa value i
HIERARCH ESO PRO REC1 PARAM45 VALUE = '5 ' / Default: 5
HIERARCH ESO PRO REC1 PARAM46 NAME = 'combinenod-clip-niter' / Number of ite
HIERARCH ESO PRO REC1 PARAM46 VALUE = '2 ' / Default: 2
HIERARCH ESO PRO REC1 PARAM47 NAME = 'combinenod-clip-diff' / Minimal change
HIERARCH ESO PRO REC1 PARAM47 VALUE = '0.1 ' / Default: 0.1
HIERARCH ESO PRO REC1 PARAM48 NAME = 'combinenod-throwlist' / Name of ascii
HIERARCH ESO PRO REC1 PARAM48 VALUE = 'throwlist.asc' / Default: 'throwlist.a
HIERARCH ESO PRO REC1 PARAM49 NAME = 'combinenod-method' / Combination metho
HIERARCH ESO PRO REC1 PARAM49 VALUE = 'MEAN ' / Default: 'MEAN'
HIERARCH ESO PRO REC1 PARAM50 NAME = 'max-slit' / Lower Slit Limit (localize
HIERARCH ESO PRO REC1 PARAM50 VALUE = '5.7 ' / Default: 5.7
HIERARCH ESO PRO REC1 PARAM51 NAME = 'min-slit' / Upper Slit Limit (localize
HIERARCH ESO PRO REC1 PARAM51 VALUE = '-5.3 ' / Default: -5.3
HIERARCH ESO PRO REC1 PARAM52 NAME = 'crh-clip-kappa' / Kappa value in sigma
HIERARCH ESO PRO REC1 PARAM52 VALUE = '5 ' / Default: 5
HIERARCH ESO PRO REC1 PARAM53 NAME = 'crh-clip-niter' / Number of iterations
HIERARCH ESO PRO REC1 PARAM53 VALUE = '5 ' / Default: 5
HIERARCH ESO PRO REC1 PARAM54 NAME = 'crh-clip-frac' / Minimal ratio of poin
HIERARCH ESO PRO REC1 PARAM54 VALUE = '0.7 ' / Default: 0.7
HIERARCH ESO PRO REC1 PARAM55 NAME = 'compute-map' / if TRUE recompute (wave
HIERARCH ESO PRO REC1 PARAM55 VALUE = 'true ' / Default: true
HIERARCH ESO PRO REC1 PARAM56 NAME = 'do-flatfield' / TRUE if we do the flat
HIERARCH ESO PRO REC1 PARAM56 VALUE = 'true ' / Default: true
HIERARCH ESO ADA ABSROT END = 168.74728 / Abs rot angle at exp end
HIERARCH ESO ADA ABSROT PPOS = 'NEG ' / sign of probe position
HIERARCH ESO ADA ABSROT START = 167.77823 / Abs rot angle at exp start
HIERARCH ESO ADA GUID DEC = -29.47483 / -29:28:29.3 Guide star DEC J2000
HIERARCH ESO ADA GUID RA = 246.872025 / 16:27:29.2 Guide star RA J2000
HIERARCH ESO ADA GUID STATUS = 'ON ' / Status of autoguider
HIERARCH ESO ADA POSANG= 99.00955 / Position angle at start
HIERARCH ESO OCS DET2 IMGNAME = 'XSHOOTER_SLT_OBJ_VIS_' / Data File Name.
HIERARCH ESO SEQ ARM = 'VIS ' / Instrument Arm
HIERARCH ESO SEQ CUMOFF DEC = -0.391497 / Cumulative DEC offset
HIERARCH ESO SEQ CUMOFF RA = -2.469156 / Cumulative RA offset
HIERARCH ESO SEQ CUMOFF X = 0. / Cumulative offset X (along the sli
HIERARCH ESO SEQ CUMOFF Y = 2.5 / Cumulative offset Y (along the sli
HIERARCH ESO SEQ JITTER WIDTH = 0. / Width of the Jitter box (arcsec)
HIERARCH ESO SEQ NOD THROW = 5. / Nodding throw length in arcsec
HIERARCH ESO SEQ RELOFF DEC = -0.391497 / List of DEC offsets
HIERARCH ESO SEQ RELOFF RA = -2.469156 / List of RA offsets
HIERARCH ESO QC NPIXSAT= 6. / Number of saturated pixels
HIERARCH ESO QC FPIXSAT= 1.46484375E-06 / Fraction of saturated pixels
HIERARCH ESO QC CRRATE = 0.157606336806 / Number of detected cosmic ray hits
HIERARCH ESO QC NCRH = 1743 / Number of detected cosmic ray hits
HIERARCH ESO QC NCRH AVG = 1743 / Average number of cosmic ray hits
HIERARCH ESO QC VRAD BARYCOR = 26.8616466972 / Barycentric radial velocity co
HIERARCH ESO QC VRAD HELICOR = 26.8582007851 / Heliocentric radial velocity c
.
HISTORY ESO-DESCRIPTORS START ................
HISTORY 'LHCUTS','R*4',1,4,'5E14.7'
HISTORY 0.0000000E+00 0.0000000E+00 1.1754944E-38 8.4130267E+02
HISTORY
HISTORY ESO-DESCRIPTORS END ................
.
END
END
#001 IMAGE -32 (24457) 36b ERRS [0/24456(1)]
#-------------------------------------------------------------------------------
XTENSION= 'IMAGE ' / IMAGE extension
BITPIX = -32 / number of bits per data pixel
NAXIS = 1 / number of data axes
NAXIS1 = 24457 / length of data axis 1
PCOUNT = 0 / required keyword; must = 0
GCOUNT = 1 / required keyword; must = 1
EXTNAME = 'ERRS '
BUNIT = 'ADU '
HDUCLASS= 'ESO ' / hdu classification
HDUDOC = 'DICD ' / hdu reference document
HDUVERS = 'DICD V6.0' / hdu reference document version
HDUCLAS1= 'IMAGE ' / hdu format classification
HDUCLAS2= 'DATA ' / hdu type classification
HDUCLAS3= 'RMSE ' / hdu info classification
SCIDATA = 'FLUX ' / name of data extension
QUALDATA= 'QUAL ' / name of qual extension
END
END
#002 IMAGE -32 (24457) 36b QUAL [0/24456(1)]
#-------------------------------------------------------------------------------
XTENSION= 'IMAGE ' / IMAGE extension
BITPIX = -32 / number of bits per data pixel
NAXIS = 1 / number of data axes
NAXIS1 = 24457 / length of data axis 1
PCOUNT = 0 / required keyword; must = 0
GCOUNT = 1 / required keyword; must = 1
EXTNAME = 'QUAL '
HDUCLASS= 'ESO ' / hdu classification
HDUDOC = 'DICD ' / hdu reference document
HDUVERS = 'DICD V6.0' / hdu reference document version
HDUCLAS1= 'IMAGE ' / hdu format classification
HDUCLAS2= 'DATA ' / hdu type classification
HDUCLAS3= 'RMSE ' / hdu info classification
SCIDATA = 'FLUX ' / name of data extension
ERRDATA = 'ERRS ' / name of errs extension
END
END